products

220V AC Heavy Duty Sliding Gate Motor Automatic Electronic Soft Start CE Approval

Basic Information
Place of Origin: SHENZHEN
Brand Name: WEJOIN
Certification: CE,ISO,SGS
Model Number: WJMP202
Minimum Order Quantity: 1 SET
Price: negotiable
Packaging Details: Carton
Payment Terms: T/T, Western Union
Supply Ability: 10000 set / month
Detail Information
Usage: Universal Material: Aluminum Alloy Die-cast
Type: Gate Operators Function: Driving
Soft Start: Yes Stop On Obstacle: Yes
High Light:

electric gate operators

,

automatic sliding gate opener


Product Description

220V AC Heavy Duty Sliding Gate Motor Automatic Electronic Soft Start CE Approval

 

Functions

1. Integrated electromechanical design
2. Electronic soft start
3. Reversing on obstacle
4. Infrared photocell socket
5. Alarm light socket
6. Wires control and remote control
7. Delay closing
8. Reversing sensitivity adjustable
9. Bus-mastering (various operation ways)
10. Automatic warm-up

 

Electronic Data

Soft start: YES

Stop on obstacle (sensitivity adjustable): YES

Auto warming-up (at freezing temperature): YES

Remote control: 418MHz (50m, approx)

Wire control: Available

Auto closing: YES

Vehicle loop detector socket: YES

Photocell socket: YES

Alarm light socket: YES

 

Motor Data

Model

WJKMP202

Voltage

220V±10%

110V±10%

Absorbed power

594W

638W

Motor speed

1350rpm

1620rpm

Gear speed

58.5rpm

70.2rpm

Travel speed

11m/min

13.2m/min

Product weight(approx)

10.19kg

10.25kg

Max.weight of gate

1800kg

 

Rack installation
Make the gear of the gear rack towards the floor. Make the gear of the rack fit the gear of the motor. Fasten the gear rack to the door with the screws. Push the gate and make it move the whole route Fasten the gear to the gate after assuring that the gate run smoothly the whole route
Rack is usually installed piece after piece. To avoid dithering or blocking, please adjust the gap of the gear rack. We suggest one way( refer to Fig-3): fix up the rack1 and rack after adjusting the two racks with the small adjusting rack.

 

Notice

1) The working voltage is 10% of the rated voltage, use power regulator if in area of volatile supply voltage.

2) The gear modulus: M=4 Gear scalar: Z=15. Please use the correspondent rack.
3) The gate should be balanceable and level. So the gear and rack can fix well.
4) The gap between gears should be fi gate operator can move smoothly.

 

220V AC Heavy Duty Sliding Gate Motor Automatic Electronic Soft Start CE Approval 0

 

Contact Details
Mr. Frank Zhang

Phone Number : +8615002051250

WhatsApp : +8615002051250