| Place of Origin: | SHENZHEN |
|---|---|
| Brand Name: | WEJOIN |
| Certification: | CE,ISO,SGS |
| Model Number: | WJMP202 |
| Minimum Order Quantity: | 1 SET |
| Price: | USD 150-200 SET |
| Packaging Details: | Carton |
| Payment Terms: | T/T, Western Union |
| Supply Ability: | 10000 set / month |
| Type: | Automatic Door Operators | Power Supply: | 110V/220V AC |
|---|---|---|---|
| Usage: | Residential Sliding Gates | Function: | Control,driving |
| Max Weight Of Gate: | 1800 KG | Material: | Aluminum Alloy Die-cast |
| High Light: | sliding gate opener motor,automatic sliding gate opener |
||
Alarm Light Socket Sliding Gate Opener , Sliding Gate Door Motor Automatic Warm Up
Overview
This is a conventional sliding gate operator, with brand-new design, brand-new clutch structure, fashionable exterior design and brand-new control technique, making the motor more humanistic.
Furthermore, the integrated electromechanical design and the streamlined appearance also make our product look more fashionable and elegant.
Functions
1. Integrated electromechanical design
2. Electronic soft start
3. Reversing on obstacle
4. Infrared photocell socket
5. Alarm light socket
6. Wires control and remote control
7. Delay closing
8. Reversing sensitivity adjustable
9. Bus-mastering (various operation ways)
10. Automatic warm-up
Sliding Gate Motor Technical Data
|
Model |
MP202 |
|
|
Voltage |
220V±10% |
110V±10% |
|
Current |
2.7A |
5.8A |
|
Absorbed power |
594W |
638W |
|
Working temperature |
-35℃～+85℃ |
|
|
Relative humidity |
≤90% |
|
|
Remote control distance |
≤50M |
|
|
Mode number |
M=4 |
|
|
Gear Speed |
58.5rpm |
70.2rpm |
|
Torque |
35NM |
|
|
Max weight of gate |
1800kg |
|
|
Travel speed |
11m/min |
13.2m/min |
|
Reduction ratio |
23:1 |
|
|
Overload protection temperature |
130℃ |
|
Motor base and it's installation
1. Motor base installation: set the installation position of the base tray according to the size of the motor and the height of the installation position of the gear rack. Then Embed the bolts in advanced or use the expansion bolts to embed the base into the cement foundation.
2. If the gear rack has already been installed, fix the motor to th base and turn the clutch with the clutch key to the off position, then make the gear of the motor suit right to the gear rack, then the position of the base can be set. Take off the motor and fix the base.
Motor installation
1.Put the motor on the base, fix up the motor with hexangular screws.
2.Loosen the four screws on the outer shell and remove the shell Connect the wire according to the electric diagram. After debugging, install the shell and fix it with bolts.
