|Max Boom Length:||3 Meters||Voltage:||110v/220v|
|Motor Material:||Die-casting Aluminum Alloy||Housing Material:||Steel|
|Boom Type:||Round Foam Boom||COM Interface:||RS485|
Weather Resistant Parking Barrier Gate,
Fence Arm Parking Barrier Gate,
RS485 Parking Lot Barrier Gate
Fence arm weather-resistant parking barrier gate for residential areas
2.No limit switch design minimizes mechanical wear and allowed a superb operating lifetime.
3.Weather resistant with plastic coating.
4.Arm length can be customized according to the site.
5.Fence arm barrier gate especially useful for longer arms where there is a big opening space underneath the arm.
6.Fence arm effectively block pedestrian trying to pass through from underneath.
|Running time||6sec||6 sec|
|Max boom length||4.5m||4m|
1. Place the selected spring in the spring cabinet
2. Put the spring and spring cabinet into the spring supporter
3. Place the threaded pole into the spring cabinet and fasten it with the necessary screws in the right hole.
4. Place the baffle ring and adjusting the screw to the bottom of the spring, and then adjust it to make it balance the weight of the boom.
The left and the right installation
For the client convenience, the following figures are the left and the right installation
For the left installation, the housing installs on the left side of the door, and the arm stretches to the right, the boom is inside the door.
For the right installation, the housing installs on the right side of the door, and the arm stretches to the left, the boom is inside the door.