Customizable and Versatile High-Performance Car Park Barrier Gate for Parking Facility Security

Automatic Barrier Gate Brief Introduction

The product consists of four parts: cabinet, transmission mechanism, control unit, and boom. It distinguishes between left-installed and right-installed, and it is used in parking lot entrance and exit control systems.

This product is divided into three types: barrier gate with straight boom, barrier gate with folding boom, and barrier gate with fence boom.

Boom Barrier Basic Features

1. Driven by a motor and equipped with a linkage transmission mechanism and a balance spring, it operates stably and reliably. The motor lifespan exceeds 2.5 million times, and the spring lifespan reaches 500,000 times.

2. All models are standard with an obstacle - sensing rebound function. When the barrier arm encounters resistance during the lowering process, it will automatically rebound.

3. It supports external connection of radar, loop detector, and infrared anti - collision functions. With a built - in DC 12V power output, it can supply power to external radar devices.

Barrier Gate Controller Interface

1. Wire Control Interface:

This interface is available for parking system, also available for external controller to control barrier gate.

2. Anti-smashing Interface:

Infrared Photocell: Boom will lift up when short circulate "Infrared photocell" and "GND" interfaces during boom falling down.

Loop Detector: Boom will lift up when short circulate "loop detector" and "GND" interfaces during boom falling down; when boom moves to up limit position, boom will fall down after "loop detector" and "GND" interfaces disconnected.

3. Relay Output Interface: 

The relay output can be set to meet different application requirements by setting the output mode. For details, please refer to item H-16 of advanced settings. The default is that the limit signal output is as follows:

When the barrier opens to up limit position, the COM and LmO are connected;

When the barrier closes to down limit position, the COM and LmC are connected;

During the opening and closing, COM and LmC, LmO are disconnected.